ISYSTEM winIDEA Support for Leopard MPC5643L
From ErikaWiki
(One intermediate revision not shown) | |||
Line 55: | Line 55: | ||
---- | ---- | ||
- | [[Category: | + | [[Category:Debugging Tool iSYSTEM winIDEA]] |
Latest revision as of 13:58, 16 November 2015
In order to use the iSystem iC5000 hardware emulator follow these steps.
The first time you launch the winIDEA program, you will be requested to create a new Workspace:
As first thing configure the communication to the iSystem device (for our purpose, we've connected the device through TCP/IP connection). Go under Hardware -> Hardware menu and set the following options:
Select iC5000, iTAG2k and press the System Configuration button | Insert the IP address, the subnet mask and leave the default TCP port. Finally press Apply Changes button | Select the TCP/IP type of connection, insert the right IP address and leave the default port as 5313 |
You can now test the communication by pressing the Test button under Hardware -> Hardware, Communication tab. The expected result should be something like:
We can now set the type of board we want to use in Hardware -> Emulation Options. Please make sure to select the right board in CPU tab:
Select the CPU corresponding to the Leopard board and press CPU Setup button | Under SoC tab make sure to select the Lock Step mode as CPU mode |
Leave all the other settings under Hardware -> Emulation Options and Hardware -> CPU Setup as default.
As last thing go under Flash -> Setup and make sure that Auto program FLASH is set to never in the Target tab as shown below:
In order to flash the device, go under Debug -> Files for Download and select the application to flash:
Finally flash the new application by pressing Debug -> Download