AUTOSAR-like MCU Driver
From ErikaWiki
Contents |
Synopsis
The MCU driver provides services for basic microcontroller initialization, power down functionality, reset and microcontroller specific functions required by other MCAL [Microcontroller Abstraction Layer] software modules. The initialization services allow a flexible and application related MCU initialization in addition to the start-up code (see figure below). The start-up code is very MCU specific. The start-up code is provided by Evidence Srl within Erika Enterprise.
MCU driver Features:
- Initialization of MCU clock, PLL, clock prescalers and MCU clock distribution
- Initialization of RAM sections
- Activation of μC reduced power modes
- Activation of a μC reset
- Provides a service to get the reset reason from hardware
The MCU driver accesses the microcontroller hardware directly and is located in the Microcontroller Abstraction Layer.
Configuration
Build
To enable AUTOSAR-like MCU Driver in Erika Enterprise compiler toolchain, the following EE_OPT
attribute is needed in the OS
object of the OSEK/VDX configuration:
EE_OPT = "__AS_MCU_DRIVER__";
The configuration C header file inclusion is done by CFLAGS
attribute in the OS
object of the OSEK/VDX configuration:
CFLAGS = "-I<PATH>";
Where <PATH>
is the absolute or relative directory path which configuration C header file is stored.
Instead the configurations C source file is added to the compilation process by APP_SRC
attribute in the CPU_DATA
object of the OSEK/VDX configuration:
APP_SRC = "<PATH>/Mcu_Cfg.c";
Where <PATH>
is the absolute or relative directory path which configuration C source file is stored.
Usage
Examples
Usage examples of the AUTOSAR-like MCU Driver for can be found at examples/cortex_mx/lm4f232xxxx/as