FLEX-Communication

From ErikaWiki

(Difference between revisions)
Jump to: navigation, search
(Created page with 'The '''FLEX-Communication''' palette: <br /><br /> {| class="wikitable" |- ! Symbol ! Description |- | image:usb_send.png | This block controls the sending of a packet throu…')
Line 8: Line 8:
|-
|-
| [[image:usb_send.png]]
| [[image:usb_send.png]]
-
| This block controls the sending of a packet through the USB connection for the FLEX FULL Board. The internal parameter specifies the channel(from 0 to 255).
+
| This block controls the sending of a packet through the USB connection for the FLEX FULL Board. The internal parameter specifies the channel(from 0 to 14).
|-
|-
| [[image:usb_read.png]]
| [[image:usb_read.png]]
-
| This block controls the reception of a packet through the USB connection for the FLEX FULL Board. The internal parameter specifies the channel(from 0 to 255).
+
| This block controls the reception of a packet through the USB connection for the FLEX FULL Board. The internal parameter specifies the channel(from 0 to 14).
|-
|-
| [[image:can_in.png]]
| [[image:can_in.png]]
-
| This block controls the sending of a packet on a CAN bus for the FLEX Board. The internal parameters specifie the message ID and the bytes number.
+
| This block controls the sending of a packet on a CAN bus for the FLEX Board. The internal parameters specify the message ID and the number of the block output lines.
|-
|-
| [[image:can_out.png]]
| [[image:can_out.png]]
-
| This block controls the reception of a packet on a CAN bus for the FLEX Board. The internal parameters specifie the message ID and the bytes number.
+
| This block controls the reception of a packet on a CAN bus for the FLEX Board. The internal parameters specify the message ID and the number of the block input lines.
|-
|-
| [[image:serial_send.png]]
| [[image:serial_send.png]]
-
| This block controls the serial sending through the RS-232 protocol for the FLEX Board. The internal parameters specifie the serial port and the baud-rate.
+
| This block controls the serial sending through the RS-232 protocol for the FLEX Board. The internal parameters specify the serial port and the baud-rate.
|-
|-
| [[image:serial_receive.png]]
| [[image:serial_receive.png]]
-
| This block controls the serial reception through the RS-232 protocol for the FLEX Board. The internal parameters specifie the serial port and the baud-rate.
+
| This block controls the serial reception through the RS-232 protocol for the FLEX Board. The internal parameters specify the serial port and the baud-rate.
|-
|-
| [[image:802154_send.png]]
| [[image:802154_send.png]]
-
| This block controls the serial sending through the 802.15.4 protocol for the FLEX Board. The internal parameters specifie the data ID, the destination address and the usse of GTS.
+
| This block controls the serial sending through the 802.15.4 protocol for the FLEX Board. The internal parameters specify the data ID, the destination address and the usse of GTS.
|-
|-
| [[image:802154_receive.png]]
| [[image:802154_receive.png]]
-
| This block controls the sending of a packet through the 802.15.4 protocol for the FLEX Board. The internal parameters specifie the data ID, the destination address.
+
| This block controls the sending of a packet through the 802.15.4 protocol for the FLEX Board. The internal parameters specify the data ID, the destination address.
|-
|-
| [[image:802154_receive.png]]
| [[image:802154_receive.png]]
| This block controls the sending of a packet through the 802.15.4 protocol for the FLEX Board. The internal parameters specifie the data ID, the destination address.
| This block controls the sending of a packet through the 802.15.4 protocol for the FLEX Board. The internal parameters specifie the data ID, the destination address.
-
|-
 
-
| [[image:zigbee_send.png]]
 
-
| This block controls the sending of a packet through the ZIGBEE protocol for the FLEX Board. The internal parameter specifies the channel (from 0 to 255).
 
-
|-
 
-
| [[image:zigbee_receive.png]]
 
-
| This block controls the reception of a packet through the ZIGBEE protocol for the FLEX Board. The internal parameter specifies the channel (from 0 to 255).
 
|-
|-
| [[image:coord.png]]
| [[image:coord.png]]

Revision as of 10:41, 28 September 2011

The FLEX-Communication palette:

Symbol Description
Usb send.png This block controls the sending of a packet through the USB connection for the FLEX FULL Board. The internal parameter specifies the channel(from 0 to 14).
Usb read.png This block controls the reception of a packet through the USB connection for the FLEX FULL Board. The internal parameter specifies the channel(from 0 to 14).
Can in.png This block controls the sending of a packet on a CAN bus for the FLEX Board. The internal parameters specify the message ID and the number of the block output lines.
Can out.png This block controls the reception of a packet on a CAN bus for the FLEX Board. The internal parameters specify the message ID and the number of the block input lines.
Serial send.png This block controls the serial sending through the RS-232 protocol for the FLEX Board. The internal parameters specify the serial port and the baud-rate.
Serial receive.png This block controls the serial reception through the RS-232 protocol for the FLEX Board. The internal parameters specify the serial port and the baud-rate.
802154 send.png This block controls the serial sending through the 802.15.4 protocol for the FLEX Board. The internal parameters specify the data ID, the destination address and the usse of GTS.
802154 receive.png This block controls the sending of a packet through the 802.15.4 protocol for the FLEX Board. The internal parameters specify the data ID, the destination address.
802154 receive.png This block controls the sending of a packet through the 802.15.4 protocol for the FLEX Board. The internal parameters specifie the data ID, the destination address.
Coord.png This block sets the Coordinator parameters for a 802.15.4 based communication for the FLEX Board. The internal parameters specifie the coordinator settings.
Device.png This block sets the Device parameters for a 802.15.4 based communication for the FLEX Board. The internal parameters specifie the device settings.
Personal tools