From ErikaWiki
(Difference between revisions)
|
|
(One intermediate revision not shown) |
Line 20: |
Line 20: |
| |- | | |- |
| | [[image:Flex_sources_dmbencin.png]] | | | [[image:Flex_sources_dmbencin.png]] |
- | | This block maps to the encoder input of the FLEX Demo Daughter Board. The internal parameter specifies the Potentiometer (from 1 to 2). | + | | This block maps to the encoder input of the FLEX Demo Daughter Board. The internal parameter specifies the encoder (from 1 to 2). |
| |- | | |- |
| | [[image:Flex_sources_dmbacc.png]] | | | [[image:Flex_sources_dmbacc.png]] |
Line 36: |
Line 36: |
| | [[image:Flex_sinks_dmbdigout.png]] | | | [[image:Flex_sinks_dmbdigout.png]] |
| | This block controls one of the eight digit output pins of the Demo Daughter Board. The internal parameter specifies the pin. | | | This block controls one of the eight digit output pins of the Demo Daughter Board. The internal parameter specifies the pin. |
- | |-
| |
- | | [[image:Flex_sinks_dmbpwmout.png]]
| |
- | | This block controls one of the PWM outputs of the Demo Daughter Board. The internal parameter specifies the pin number (from 1 to four).
| |
| |- | | |- |
| | [[image:Flex_sinks_dmblcd.png]] | | | [[image:Flex_sinks_dmblcd.png]] |
Line 44: |
Line 41: |
| |- | | |- |
| | [[image:Flex_sinks_dmbdac.png]] | | | [[image:Flex_sinks_dmbdac.png]] |
- | | This block controls one of the two DAC outputs. The internal parameter specifies the DAC channel number. The imput is from 0.0 (0.0 V) to 1.0 (3.0 or 5.0 V depending on the HW configuration) | + | | This block controls one of the two DAC outputs. The internal parameter specifies the DAC channel number. The input is from 0.0 (0.0 V) to 1.0 (3.0 or 5.0 V depending on the HW configuration) |
| |- | | |- |
| | [[image:Flex_sinks_dmbbuzzer.png]] | | | [[image:Flex_sinks_dmbbuzzer.png]] |
Latest revision as of 14:49, 11 October 2011
The FLEX-DemoBoard palette:
Symbol
| Description
|
| This block maps to an analog input pin of the FLEX Demo Daughter Board. The internal parameter specifies the ADC pin (from 1 to 8).
|
| This block maps to an digital input pin of the FLEX Demo Daughter Board. The internal parameter specifies the GPIO pin (from 1 to 8).
|
| This block maps to a button of the FLEX Demo Daughter Board. The internal parameter specifies the Button (from 1 to 4).
|
| This block maps to the potentiometer analog input of the FLEX Demo Daughter Board. The internal parameter specifies the Potentiometer (from 1 to 4).
|
| This block maps to the encoder input of the FLEX Demo Daughter Board. The internal parameter specifies the encoder (from 1 to 2).
|
| This block maps to the accelerometer input of the FLEX Demo Daughter Board. The internal parameter specifies the Channel (1=x, 2=y, 3=z).
|
| This block maps to the light sensor of the FLEX Demo Daughter Board.
|
| This block maps to the temperature sensor of the FLEX Demo Daughter Board.
|
| This block controls one of the eight LEDs of the Demo Daughter Board. The internal parameter specifies the LED number.
|
| This block controls one of the eight digit output pins of the Demo Daughter Board. The internal parameter specifies the pin.
|
| This block controls the LCD on the Demo Daughter Board.
|
| This block controls one of the two DAC outputs. The internal parameter specifies the DAC channel number. The input is from 0.0 (0.0 V) to 1.0 (3.0 or 5.0 V depending on the HW configuration)
|
| This block controls the buzzer mounted on the Demo Daughter Board. The input value is the frequency of the buzzer sound, in Hz.
|
| This block controls a PWM output of the FLEX Board. The internal parameter specifies the PWM pin (from 1 to 4).
|
| This block controls the LED barrier of the FLEX Board. The internal parameter specifies the threshold.
|