FLEX Sinks

From ErikaWiki

Jump to: navigation, search

The FLEX Sinks palette:

Symbol Description
Flex sinks flexled.png This block controls the FLEX system LED. The LED is on when the input is greater than 0.5.
Flex sinks flexgpout.png This block controls an output pin of the FLEX Board. It has an internal parameter which is the ouput pin.
Flex sinks flexpwm.png This block controls a PWM output of the FLEX Board. The internal parameter specifies the PWM pin (from 1 to 4).
Flex sinks flexlcd.png This block controls the LCD which is attached to the first prototype of the Demo Daughter Board (this hardware is no more available, and the block is here for historical usage). If used with the Demo Daughter Board, it controls the LCD of that board.
Flex sinks dmbled.png This block controls one of the eight LEDs of the Demo Daughter Board. The internal parameter specifies the LED number.
Flex sinks dmbdigout.png This block controls one of the eight digit output pins of the Demo Daughter Board. The internal parameter specifies the pin.
Flex sinks dmbpwmout.png This block controls one of the PWM outputs of the Demo Daughter Board. The internal parameter specifies the pin number (from 1 to four).
Flex sinks dmblcd.png This block controls the LCD on the Demo Daughter Board.
Flex sinks dmbdac.png This block controls one of the two DAC outputs. The internal parameter specifies the DAC channel number. The imput is from 0.0 (0.0 V) to 1.0 (3.0 or 5.0 V depending on the HW configuration)
Flex sinks dmbbuzzer.png This block controls the buzzer mounted on the Demo Daughter Board. The input value is the frequency of the buzzer sound, in Hz.
Personal tools